Pressure Control Equipment

TIS Apollo Wireline Valves are specifically designed for maximum reliability, flexibility and simplicity of use, while carrying out routine intervention work.

TIS Triton Wireline Valves are specifically designed for maximum reliability, flexibility and simplicity of use, while carrying out routine intervention work.

TIS Stuffing Boxes are designed to retain well pressure around moving and stationary wire while guiding slickline wire into the top of the lubricator stack.

TIS Liquid Seal Stuffing Boxes are designed for use in combination with a TIS Stuffing Box to retain well pressure, typically while performing slickline operations on HP/HT wells.

The TIS Chemical Injection Subs are installed below grease injection control heads or slickline stuffing boxes and are designed to apply various fluids to the wireline during well service operations, including de-icing agents, corrosion inhibitors, and lubricating oils.

TIS Pressure In-Situ Test Subs are installed between the lower lubricator section and the wireline valve and are designed to significantly reduce operating costs by removing the need to re-pressure test the entire PCE rig-up when multiple wireline runs are required.

TIS Pump-in Tees are designed to facilitate a sizeable fluid flow entry path into the surface pressure control equipment during well stimulation or hydrostatic testing operations.

TIS Grease Injection Control Heads are installed on top of the lubricator stack and are used to facilitate a seal and retain well pressure around moving and stationary braided line.

TIS Quick Union Crossovers and Tubing Adapters are designed to provide a transition between different connections used in normal service and during completion operations.

TIS Quick Union Test Cap Sets and Stumps are used for testing surface pressure control equipment. Each set is comprised of a blanking cap and collar and a mounting stump.

TIS Quick Union Lift-Test and Lifting Caps are designed to lift heavy items of surface pressure control equipment in a safe and efficient manner.

TIS Hydraulic Line Wipers are used in conjunction with our standard grease injection control heads.

TIS Swabbing Heads are installed on top of the lubricator stack and are used to retain a low pressure fluid seal around braided cable during swabbing operations.

TIS Hydraulic Tool Catchers are installed below the stuffing box or grease injection control head and are designed to engage the fishing neck on the rope socket / cable head, in the event of the wire / cable being detached due to slamming.

TIS Lubricator & Riser Sections are pressure retaining chambers for introducing the wireline tool string into a well during operations.

TIS Tool Traps are designed as a safety measure positioned at the base of the surface well intervention manifold, using a spring loaded flapper mechanism to prevent the tool string from being dropped down the well.

TIS thread protectors are precision moulded in hard wearing durable rubber, providing better thread protection, during transportation.

TIS Quick union rig up dollies are designed to assist personnel safely whilst handling the lubricator stack from the horizontal to the vertical and vice-versa, when rigging up and rigging down from the wellhead.

TIS Wellhead Flange Adapters are designed to be installed on to API wellheads and provide a transition between the xmas tree and the well intervention pressure control equipment.